Auteurs | Titre | Référence |
---|---|---|
Berdin C., Yao Z.Y., Pascal S. | Internal stresses in polycrystalline zirconia: Microstructure effects | Computational Materials Science 70 140-144, 2013. |
Jason L., Durand S. | A two-surface plastic model for concrete behaviour | Revue Européenne de Génie Civil, 11, 5, pp. 579-602, 2007 |
Jason L., Ghavamian S., Courtois A. | Truss vs solid modelling of tendons in concrete structures : Consequences on mechanical capacity of a Representative Structural Volume |
Engineering Structures, 32, pp.1779-1790, 2010 |
Casanova A., Jason L., Davenne L. | Bond slip model for the simulation of reinforced concrete structures | Engineering Structures, 39, pp.66-78, 2012 |
Torre-Casanova A., Jason L., Davenne L., Pinelli X. | Confinement effects on the steel-concrete bond strength and pull-out failure | Engineering Fracture Mechanics, 97, pp. 92-104, 2013 |
Jason L., Torre-Casanova A., Davenne L., Pinelli X. | Cracking behavior of reinforced concrete beams. Experiment and simulations on the numerical influence of the steel-concrete bond |
International Journal of Fracture, 180, 2, pp. 243-260, 2013 |
Nicolas X., Medale M., Glockner S., Gounand S. | Benchmark solution for a three-dimensional mixed-convection flow, part 1: Reference solutions. |
Numerical Heat Transfer, Part B: Fundamentals, 60(5):325-345, 2011 |
Nicolas X., Gounand S., Medale M., Glockner S. | Benchmark solution for a three-dimensional mixed-convection flow, part 2: Analysis of richardson extrapolation in the presence of a singularity. |
Numerical Heat Transfer, Part B: Fundamentals, 60(5):346-369, 2011. |
Genty A., Le Potier C., Gounand S. | Analysis of the excavation deviations impact on geological radioactive waste repository performance. |
Geotechnical and Geological Engineering, 29:537-554, 2011. 10.1007/s10706-011-9401-5. |
Kudriakov S., Studer E., Bin C. | Numerical simulation of the laminar hydrogen flame in the presence of a quenching mesh. |
International Journal of Hydrogen Energy, 36(3):2555 - 2559, 2011. |
Beccantini A., Studer E., Gounand S., Magnaud J.P., Kloczko T., Corre C., Kudriakov S. | Numerical simulations of a transient injection flow at low mach number regime. |
International Journal for Numerical Methods in Engineering, 76(5):662-696, 2008. |
Studer E., Beccantini A., Gounand S., Dabbene F., Magnaud J.P., Paillère H., Limaiem I., Damian F., Golfier H., Bassi C., Garnier J.C. | Cast3m/arcturus: A coupled heat transfer {CFD} code for thermal-hydraulic analyzes of gas cooled reactors. |
Nuclear Engineering and Design, 237(15-17):1814 - 1828, 2007. |
Cartalade A., Montarnal P., Filippi M., Mugler C., Lamoureux M., Martinez J.M., Clément F., Wileveau Y., Coelho D., Tevissen E. | Application of inverse modeling methods to thermal and diffusion experiments at mont terri rock laboratory. |
Physics and Chemistry of the Earth, Parts A/B/C, 32(1-7):491 - 506, 2007. |
Gabriel F., Escuriol Y., Dabbene F., Gastaldi O., Salavy J.F, Giancarli L. | A 2d finite element modelling of tritium permeation for the {HCLL} {DEMO} blanket module. |
Fusion Engineering and Design, 82(15-24):2204 - 2211, 2007. |
Montarnal P., Mügler C., Colin J., Descostes M., Dimier A., Jacquot E. | Presentation and use of a reactive transport code in porous media. |
Physics and Chemistry of the Earth, Parts A/B/C, 32(1-7):507 - 517, 2007. |
Farabolini W., Ciampichetti A., Dabbene F., Fütterer M.A., Giancarli L., Laffont G., Li Puma A., Raboin S., Poitevin Y., Ricapito I., Sardain P. | Tritium control modelling for a helium cooled lithium-lead blanket of a fusion power reactor. |
Fusion Engineering and Design, 81(1-7):753 - 762, 2006. |
Paillère H., Le Quéré P., Weisman C., Vierendeels J., Dick E., Braack M., Dabbene F., Beccantini A., Studer E., Kloczko T., Corre C., Heuveline V., Darbandi M., Hosseinizadeh S. F. | Modelling of natural convection flows with large temperature differences: A benchmark problem for low mach number solvers. part 2. contributions to the june 2004 conference. |
Fusion Engineering and Design, 81(1-7):753 - 762, 2006. |
Bernard-Michel G., Le Potier C., Beccantini A., Gounand S., Chraibi M. | The andra couplex 1 test case: Comparisons between finite-element, mixed hybrid finite element and finite volume element discretizations. |
Computational Geosciences, 8(2):187-201, 2004. |
Mügler C., Montarnal P., Dimier A., Trotignon L. | Reactive transport modelling on the {ALLIANCES} software platform. |
In Cass T. Miller and George F. Pinder, editors, Computational Methods in Water Resources: Volume 2 Proceedings of the XVth International Conference on Computational Methods in Water Resources, volume 55, Part 2 of Developments in Water Science, pages 1103 - 1115. Elsevier, 2004. |
Mügler C., Filippi M., Montarnal P., Martinez J.M., Wileveau Y. | Determination of the thermal conductivity of opalinus clay via simulations of experiments performed at the mont terri underground laboratory. |
Journal of Applied Geophysics, 58(2):112 - 129, 2006. |
Richard B., Ragueneau F., Crémona C., Adelaide L. | Isotropic continuum damage mechanics for concrete under cyclic loading: stiffness recovery, inelastic strains and frictional sliding. |
Engineering Fracture Mechanics, 77(8):1203-1223, 2010. |
Richard B., Ragueneau F., Crémona C., Adelaide L., Tailhan J.L. | A three-dimensional steel-concrete interface model including corrosion effects. |
Engineering Fracture Mechanics, 77(6):951-973, 2010. |
Ragueneau F., Richard B., Crémona C., Berthaud Y. | Damage mechanics applied to the modelling of corroded reinforced concrete structures: steel, concrete and steel/concrete interface. |
European Journal of Environmental and Civil Engineering, 14(6-7):869-890, 2010. |
Richard B., Epaillard S., Crémona C., Elfgren L., Adelaide L. | Non linear finite element analysis of a 50 year old concrete trough bridge. |
Engineering Structures, 32(12):3899-3910, 2010. |
Richard B., Ragueneau F., Adelaide L., Crémona C. | A multifiber approach for modeling corroded reinforced concrete structures. |
European journal of mechanics A/Solids, 30(6):950-961, 2011. |
Richard B., Quiertant M., Bouteiller V., Adelaide L., Tailhan J.L., Crémona C. | Influence of accelerated corrosion on the reinforced cover concrete cracking behavior: experimental and numerical study. |
European Journal of Environmental and Civil Engineering, 16(3-4), 2012. |
Richard B., Adelaide L., Crémona C., Orcési A. | A methodology for robust updating of nonlinear structural models. |
Engineering Structures, 41:356-372, 2012. |
Richard B., Crémona C., Adelaide L. | A response surface method based on support vector machines trained with an adaptive experimental design. |
Structural Safety, 39:14-21, 2012. |
Richard B., Ragueneau F. | Continuum damage mechanics based model for quasi brittle materials subjected to cyclic loadings: formulation, numerical implementation and applications. |
Engineering Fracture Mechanics, 98 :383-406, 2013. |
Maugis P., Aguiar L., Grenier C. | Interest of hydrogeological study in the interpretation of pollen proxies for palaeo-climate reconstitution: example from Senegale "niaye". |
C.R. Palévol, 2009. |
Mouche E., Maugis P., Zakharov P. | Gradual deformation method for the estimation of flow parameters in subsurface hydrology. |
Proceedings of the Eighth International Geostatistics Congress, Santiago, Chile 1-5 December 2008, 2008. |
Maugis P., Imbert C. | Confined wetting of FoCa clay powder/pellet mixtures: Experimentation and numerical modelling. |
Physics and Chemistry of the Earth, 32, 2007. |
Teles V., Maugis P., Mouche E., Bruthet J., Wendling J., Vigneron G. | Impact of the landscape evolution on the hydraulic boundary condition of the Callovo-Oxfordian formation. |
Physics and Chemistry of the Earth, 32, 2007. |
Maugis P., Mouche E., Dewiere L. | Analysis of displacement variances in stochastic nonuniform flows by means of a first order analytical model and comparison with Monte-Carlo simulations. |
Transport in Porous Media, 47(1), 2002. |
Imbert C., Gatabin C., Maugis P., Leboulch D., Mouche E. | Hydro mechanical behaviour of a heterogeneous swelling clay material. |
Poromechanics II, Proc. of the second Biot conf. on poromechanics, Swets & Zeitlinger, Lisse, 2002. |
Darcel C., Donato M., Grenier C., Maugis P., Mouche E. | Influence of pumping head data in the conditional estimation of a transmissivity field. |
Calibration and Reliability in Groundwater Modelling, Proc. of the ModelCare 99 conference, IAHS publication n° 265 ,2000. |
Maugis P., Mouche E., Dewiere L. | Influence of boundary conditions on tracer dispersion in an aquifer. |
Proc. of the 4th annual conference of IAMG, 1998. |
Matallah M., Laborderie C. | Inelasticity-damage-based model for numerical modeling of concrete cracking. |
Engineering Fracture Mechanics 76(8) 1087-1108, 2009. |
Matallah M., Laborderie C., Maurel O. | A practical method to estimate crack openings in concrete structures. |
International Journal for Numerical and Analytical Methods in Geomechanics 34(15) 1615-1633, 2010. |
Matallah M., Farah M., Grondin F., Loukili A., Rozière E. | Size-independent fracture energy of concrete at very early ages by inverse analysis. |
Engineering Fracture Mechanics 109, Pages 1-16, 2013. |
Nguyen T.D., Meftah F. | Behavior of hollow clay brick masonry walls during fire. Part 2: 3D finite element modeling and spalling assessment. |
FireSafetyJournal, Volume 66, Pages 35-45, 2014. |
Aiello G., Aubert J., Jonquères N., Li Puma A., Morin A., Rampal G. | Development of the Helium Cooled Lithium Lead blanket for DEMO. |
Fusion Engineering and Design, 2014. |
Guerin C., Laporte T., Cappelaere C., Vaille C., Mongabure P., Miquet A. | CAST3M modelling of a spent fuel assembly bending during a handling accident. Rod failure risk evaluation from the experimental results of spent fuel rod bending test. | Mechanics and Industry, 2014. |
Le Quilliec G., Lieurade H.P., Bousseau M., Drissi-Habti M., Inglebert G., Macquet P. | Mechanics and modelling of high-frequency mechanical impact and its effect on fatigue. | Welding in the World, 2013. |
Verpeaux P., Pascal S. | Etude d'un propulseur de modèle réduit d'aéronef. | CSMA, 2013. |
Verpeaux P., Charras T. | Multiplicateur de Lagrange, Condensation Statique et Conditions Unilatérales. | CSMA, 2011. |
Cognard J.Y., Thomas F., Verpeaux P. | An integrated approach to solving mechanical problems on parallel computers. | Advances in Engineering Software, 1999. |
Trollé B. | 2D fatigue crack propagation in rails taking into account actual plastic stresses. | Engineering Fracture Mechanics 123, Pages 163-181, 2013. |
Taleb Ch., Ammari F. | Etude numérique de la stabilité au voilement local des âmes des profilés laminés sous compression centrée. | 21ème Congrès Français de Mécanique, Bordeaux, France(FR), 2013. |
Barbié L., Ramière I., Lebon F. | An automatic multilevel refinement technique based on nested local meshes for nonlinear mechanics. | Computers and Structures, 2014. |
Feau C., Politopoulos I., Kamaris G. S., Mathey C., Chaudat T., Nahas G. | Experimental and numerical investigation of the earthquake response of crane bridges. | Engineering Structures, 2014. |
Nguyen T.D., Phan V.T., Bui Q.H. | Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by severe plastic deformation by crystal plasticity finite element model. |
Journal of Engineering Materials and Technology, ASME, USA, 2015. |
Sargentini L., Cariteau B., Angelucci M. | Experimental test and computational model for fluid-structure interaction in an enclosed hexagonal assembly. | ASME 2014 Pressure Vessels and Piping Conference, Volume 5: High-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper, Symposium and Competition, Anaheim, California, USA, July 20-24, 2014, ISBN: 978-0-7918-4602-5. |
Maurel J.F. | Génie Mécanique. | Dunod, 2015. |
Helfer T. | Extension of monodimensional fuel performance codes to finite strain analysis using a Lagrangian logarithmic strain framework. | Nuclear Engineering and Design, Pages 75-81, 2015. |
Recho N., Bares J., Richard B. | Méthode de calcul par éléments finis. | Ellipses, 2015. |
Helfer T., Michel B., Proix J.M., Salvo M., Sercombe J., Casella M. | Introducing the open-source mfront code generator: Application to mechanical behaviours and material knowledge management within the PLEIADES fuel element modelling platform. | Computers and Mathematics with Applications, Volume 70, Issue 5, September 2015, Pages 994-1023. |
Richard B., Ile N., Frau A., Ma A., Loiseau O., Giry C., Ragueneau F. | Experimental and numerical study of a half-scaled reinforced concrete building equipped with thermal break components subjected to seismic loading up to severe damage state. | Engineering Structures, 92, 29-45, 2015. |
Llau A., Jason L., Dufour F., Baroth J. | Adaptive zooming method for the analysis of large structures with localized nonlinearities. | Finite Elements in Analysis and Design 106, 73-84, 2015. |
Helfer T., Bejaoui S., Michel B. | A fuel performance code for innovative fuel elements or experimental devices design. | Nuclear Engineering and Design, 294, Pages 117-136, 2015. |
Nguyen T.D., Nguyen D.D. | Evaluation of elastic properties and thermal expansion coefficient of composites reinforced by randomly distributed spherical particles with negative Poisson's ratio. | Composite Structures, Volume 153, 1 October 2016, Pages 569-577, ISSN 0263-8223. |
Phan V.T., Nguyen T.D., Bui Q.H., Dirras G. | Modelling of microstructural effects on the mechanical behavior of ultrafine-grained Nickel using crystal plasticity finite element model. | International Journal of Engineering Science, Vol 94, September 2015, Pages 212-225. |
Hamlaoui M., Oueslati A., Lamri B., de Saxcé G. | Finite element analysis of the plastic limit load and the collapse mechanism of strip foundations with non-associated Drucker-Prager model. | European Journal of Environmental and Civil Engineering, 19(10), 1179-1201, 2015 |
Nguyen M. C., Medale M., Asserin O., Gounand S., Gilles P. | Sensitivity to welding positions and parameters in GTA welding with a 3D multiphysics numerical model. | Numerical Heat Transfer, Part A: Applications, Volume: 71, Issue: 03, pages 233 - 249, 2016 |
Ile N., Frau A. | Use of response envelopes for seismic margin assessment of reinforced concrete walls and slabs. | Nuclear Engineering and Design. Volume 314, Pages 238-250, 1 April 2017 |
Riccardi F., Kishta E., Richard, B. | A step-by-step global crack-tracking approach in E-FEM simulations of quasi-brittle materials. | Engineering Fracture Mechanics, 170, 44-58, 2017 |
Richard B., Kishta E., Giry C., Ragueneau F. | Strong discontinuity analysis of a class of anisotropic continuum damage constitutive models-Part I: Theoretical considerations. | Mechanics Research Communications, 2016 |
Kishta E., Richard B., Giry C., Ragueneau F. | Strong discontinuity analysis of a class of anisotropic continuum damage constitutive models-Part II: Concrete material application. | Mechanics Research Communications, 2017 |
Wang F., Feau C. | Seismic fragility curve estimation using signals generated with GMPE - Case study on the Kashiwasaki-Kariwa power plant. | SMIRT 24, 2017 |
Wang F., Rambach J.M. | Contribution to the IAEA soil-structure interaction KARISMA benchmark. | SMIRT 22, 2013 |
O. S. Bursi, G. Abbiati, E. Cazzador, P. Pegon, F. J. Molina | Nonlinear heterogeneous dynamic substructuring and partitioned FETI time integration for the development of low-discrepancy simulation models. | Int. J. Numer. Meth. Engng 2017; 112:1253-1291 |
© Cast3M 2003 - Tous droits réservés.
Mentions légales